Up for auction is this old amplifier from Laney, I think is a 1990 model since the transformer has that date on it, is pictured so you can see it, used amp and little dusty for being stored, has been tested, sounds and works good, no footswitch, loud for its 50 watts, tubes are fresh, not much use on it, pictures shows the actual deal, please take time to check them all, heavy amp, please ask.. 1990 Laney Pro Tube AOR 50 Series II. View fullsize. Overview. Specs. 2 Channels. 50w Output. 4x EL34Power Tubes.. with a looser low end, and in the "AOR" channel (high gain) it was borderline fuzzy, except when the bright switch was pulled out which could easily make it overly bright. Both the main channel and the AOR channel can be.
This Laney AOR Pro Tube 50 guitar amp is said to be like a Marshall JCM800 clone, but in actuality it is arguably an upgrade at a lesser cost. Much like JCM800 in grit and gain, the Laney AOR Pro Tube 50 set it self apart from the JCM800 by adding an addition preamp valve to achieve more tonal ranges. This amp kicks all hell from the clean to.. I have just found a guy not too far from me selling a series 1 'Laney Pro Tube AOR 50'. I have been looking around for one of these babies for a long time (well the 100w model anyway), however.. Would the 50 watt be able to handle all the fat bassy lows I want to run through it at a decent volume.